[Error Code] develop +6000 sc-4522

[DIONISIS]

sc 4522 .when i performed colour registation(auto)the machine working for a few days and then sc 4522 is displaying!!
i have clean and inspect the sensors and sutters without problem!!

[blazebusiness]

Re: develop +6000 sc-4522

sc 4522 .when i performed colour registation(auto)the machine working for a few days and then sc 4522 is displaying!!
i have clean and inspect the sensors and sutters without problem!!

Since you've already cleaned the registration sensor ....Inspect the transfer belt ..... they can sometimes walk out of position to one side or the other. And you could always try replacing the sensor(ps9). And pray it's not a problem with the Printer Control Board. You should post develop questions in the "Konica forum" since it's really a "Bizhub Press C6000". You will get much more traffic and suggestions since that forum is much busier than posting here in "Other copier brands"

[DIONISIS]

Re: develop +6000 sc-4522

thanks for the suggestions!!!i already observed the transfer belt edges for missaligment, but its o.k