TDS 700 Controller 1.8.3

[vishop]

Hi there,

Anyone have experience with a TDS700 controller version 1.8.3?

I recently reinstalled this version. But after doing so, i cant have the Scan (to file) to come out. License is already there and activated, corresponding MAC address is already set. Everything is back except for the Scan button.

Anyone got an idea???

Thank You

[vishop]

Re: TDS 700 Controller 1.8.3

Somebody someday might encounter this problem, here was the solution to the problem.

For this version of the controller. Scan To File would only function if there is a minimum of 1GB RAM on the controller. If it's below 1GB, SCAN will not pop up in the menu even if all license and settings are in place. So put 1GB or more on the controller and problem solved.