[Error Code] Oki MB470 Scanner Lamp Error

[ricmartinho]

Hello,

I have one Oki MB470 that pops up with Scanner Lamp Error at power on. The machine prints fine, the scanner lamp turns on and the scanner moves but the error doesn't go away.
I'm going to check the scanner white plate and HP sensors.
Is there anything else I can check?

I'm not used to service Oki, it's mostly Ricoh and Konica Minolta. And by the way, where can I get firmware for this model and the Maintenance Utility?

Thanks!

[ricmartinho]

Re: Oki MB470 Scanner Lamp Error

Hello again!

The problem is solved. It was the flat cable that connects the scanner PCB to the CCD.

Anyone out there has the part number for this?
OKI_MB470.jpg

I also need the part number of the 2 covers highlighted.
OkiMB470_2.jpg

Thanks