KXMB271

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • GottaFixEmAll
    Technician

    50+ Posts
    • Jun 2007
    • 55

    #1

    KXMB271

    Hi, I'm looking for a bit of information on this small printer copier ... I need the spring clutch in the ADF that drives the input feed roller. The C-clip came off and ruined the clutch ... Panasonic says they can't send me a page from the parts manual ... and what they researched and sent was a gear (the gear that the clutch attaches to) ...

    Anyone know of a part # or a source for this part ???

    Thanks, Mike
  • blsquires
    Trusted Tech

    Site Contributor
    250+ Posts
    • Nov 2008
    • 342

    #2
    KX-MB271

    HIhttp://www.pstc.panasonic.com/Epartr/PartsList.asp
    MIKE
    dont know if this will help its the parts for the machine but no drawing so you may need to try and pick out what you want.

    brian

    Comment

    • blsquires
      Trusted Tech

      Site Contributor
      250+ Posts
      • Nov 2008
      • 342

      #3
      KX-MB271

      mike me again with the correct address
      Model Selection

      Comment

      • GottaFixEmAll
        Technician

        50+ Posts
        • Jun 2007
        • 55

        #4
        Panasonic KXMB271

        I've been to that site ... thx for the reply ...

        I've been in contact with the national parts center and they sent me the gear that the clutch attaches to ... I was hoping to get a page out of their parts manual ... but they said that they will only sell me the entire service and parts manual for 37.00 !!

        these are the little machines that Costco was selling for 57.99, guess you get what you pay for !!

        for Info: found that Brother laser printer toner works in these

        Mike

        Comment

        Working...