Panasonic DP6030

[AverageTech]

Only when scanning more than 10 pages. The MPF restart again(turn off and back on again). Alraedy replace the HDD, the scan chip, and the SC board where the scan chip plugs into. Oh, reflashed firmware. Don't know what else to do.

[Utahrob1]

Sounds like there may be a comunication problem between the ADF and the DRV or SPC. I would look at the cables closer and it may be a SPC board.
Good luck, aloha Robert

[The-Peanut]

Only when scanning more than 10 pages. The MPF restart again(turn off and back on again). Alraedy replace the HDD, the scan chip, and the SC board where the scan chip plugs into. Oh, reflashed firmware. Don't know what else to do.

when u mean scan chip do u mean the scan module, if so try fitting optional memory, try installing the latest firmware

[yakyitz]

Panasonic rebooting

Try also reseating all the connectors on SC,SPC and drv board, also check insulation on pf clutches if they somehow get worn off and intermitantly rub the metal frame will cause that problem as well

[AverageTech]

Only when scanning more than 10 pages. The MPF restart again(turn off and back on again). Alraedy replace the HDD, the scan chip, and the SC board where the scan chip plugs into. Oh, reflashed firmware. Don't know what else to do.

Thanks Robert the answer is the SPC board.

[Utahrob1]

Anytime, glad it worked.

[qcb copier]

Re: Panasonic DP6030

I have a problem in my Panasonic DP-6030 MFP that it prints half on letter size paper. It prints perfectly with the machines memory saved prints.