PANASONIC 7718

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • flytyer
    • Jun 2025

    #1

    PANASONIC 7718

    How to enter service mode?? I need to calibrate developer and reset web count??
    Tnx in advance
    flytyer
  • suckis
    Trusted Tech
    100+ Posts
    • Dec 2006
    • 165

    #2
    Hello flytyer.

    To enter the service mode, press "USER PRESETS", "Multi-Copy key 3" and "Original Size A3" keys simultaneously, then F1 will appear in the display.

    After replacing new developer, run F8-09.
    After replacing new drum, run F8-14.
    After replacing the web, reset F7-26 to 1 (80K).

    I hope I helped.
    ! RTFM !
    My site: http://www.e-club.gr/

    Comment

    • flytyer

      #3
      Re panasonic 7718

      TNX SUCKIS
      I NOW HAVE THE M/C FIXED.
      THE ONLY WAY I COULD GET INTO SERVICE MODE WAS TO:
      PRESS AND HOLD "user preset", PRESS "orig ledger", then WHILE HODING THESE TWO KEYS, PRESS "3". BINGO WE HAVE F1

      TNX AGAIN FLYTYER

      Comment

      Working...