Panasonic dp-3510

[aamirmasood]

Dear Members,


I have panasonic photocopier Model DP-3510 a error display when i on my machine E3 40 plz help me regarding this code wot i do if anybody knows..


thanks

aamir masood

[onetek]

clean your copy density sensor...

[The-Peanut]

remove the drum unit from the machine

remove the drum

clean the sensors that r located below the drum blade located towards the back end of the housing assay

bend the toner catch blade out a little

rebuild and try that.

[safos]

E3- 40 Copy Density Sensor output
adjustment
1. Sensor connector is disconnected.
2. Sensor is defective.
3. SPC PCB connector is disconnected.
4. SPC PCB is defective.

[scepter2112]

Shot drum will give you a E3-40code