If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
how do i reset this fuser code. i have press and hold function,3,a3/ledger, then go to f9, then ram init, then lbp fuser reset. is this procedure correct before i go. if not can i get the correct procedure. thanks t
how do i reset this fuser code. i have press and hold function,3,a3/ledger, then go to f9, then ram init, then lbp fuser reset. is this procedure correct before i go. if not can i get the correct procedure. thanks t
close !
press function key and hold , press original ledger key, continue holding both keys and press the number3 key to enter service mode. the rest is correct. don't forget to reset main power switch in the back to complete operation.
Comment