If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
The way we set it up on the 2330/3030 uses the forward fonction in fax parameters. before this you have to program an email adress and select it with the fax forward feature.Your faxes will be forwarded to that email...
The way we set it up on the 2330/3030 uses the forward fonction in fax parameters. before this you have to program an email adress and select it with the fax forward feature.Your faxes will be forwarded to that email...
Thank you for your reply onetek.Beside email address and fax forward funtion do we need to creat share folder in the pc using smb ? Is complicated to configure ?Can you email me with the configuration feature ? My email address : petesim1965@yahoo.com
sent you panafax driver manual but email didnt work.To fax to email, you dont need any configuration on the computer, only the machine needs to have the email option.
Fonction, general settings, admin, set you ip adress fixed, dns,netmask,gateway, then back to function, email/fax settings, find user paramters, set logo, then fax number, then device email adress, smtp server name.Then in fax parameters, set parameter 54 to forward to an email adress that you have previously entered in you email adress book.I am not in front of a copier so cant be more specific....
sent you panafax driver manual but email didnt work.To fax to email, you dont need any configuration on the computer, only the machine needs to have the email option.
Fonction, general settings, admin, set you ip adress fixed, dns,netmask,gateway, then back to function, email/fax settings, find user paramters, set logo, then fax number, then device email adress, smtp server name.Then in fax parameters, set parameter 54 to forward to an email adress that you have previously entered in you email adress book.I am not in front of a copier so cant be more specific....
Sorry for late reply cause pc send for repaire.
Thank you , i will try and can you try to email me at this email address :sim_dynacom@yahoo.com
Comment