dp 8045 passcode for service mode

[copierlady]

Hi guys, I am trying to reset fuser code on a Panasonic DP 8045. When I enter service mode it is asking for passcode.

[jaybug]

service code

eight zeros

[copierlady]

Ok. Thanks. I thought i tryed that. But, i'll give it another shot in the am.

[mojorolla]

Slowly

It is eight consecutive zeros, BUT put them in slowly; it's a fickle bastard. To reset the fuser F9, RAM Initialize, then LBP reset and reset the power

[copierlady]

Ok guys, thanks a lot. Got it reset and running again. Must have been in to big a hurry first time i tried.