how to reset password for einter program mode panasonic DP-8060

[tariq65]

an other (tech) change the default password how to reset the default password thank you.

[User Name]

I just found out I can't help you, but I tried.

I was experimenting on one of our in-house 8060s and I changed the service mode password (F7-09) from default 00000000 to 12345678 and now it won't let me change it back. I never had to mess with the code before so now I'm lost. If someone could help me as well, I would appreciate it. Thanks.

[tariq65]

Dear sir,
I can change password but aftar changing password, i was lost password now i can't enter programme mode, so plz help me wt i do.

[mojorolla]

You have to change to SC board. Panasonic sent me a board with the password changed when I received it. I had to send it back. If there is a back door, they were not giving up the secret.

[Peter Sim]

an other (tech) change the default password how to reset the default password thank you.

You can try F7-01(Application Password)

[mkb]

Reset password

It happen to me you can use fax memory card (2) to make a firmware. Then use the port on the side its been 2 or so years I got it from Tony at Panasonic. Monty

[mojorolla]

I think Tony and Fred are the only 2 left down there.