DPMC210 Printing blank pages after receiving faxes

[User Name]

Hey everyone,

I have a DPMC210 that prints a blank page with TOTAL P. 001/002/etc. in the top right-hand corner of the page after receiving faxes. It seems to be a page that tells the total number of pages that have been faxed. Each page is already numbered when it's received so I don't know what the point of this is but I believe it is a setting in the machine. Does anybody know what setting that is to turn this off.

Thanks.

[mkb]

It might be printing a report after every fax rec. Its in the user manual pg. 63

Printing a confirmation report

{#}{

4}{0}{1}
{0} “Off”: Confirmation reports will not be printed.

{

1} “On”: A confirmation report will be printed after every fax transmission.

{

2} “Error” (default): A confirmation report will be printed only when fax

transmission fails.

Setting the journal report to
print automatically

{#}{

4}{0}{2}
{0} “Off”: The unit will not print a journal report, but will keep a record of the
last 30 fax transmissions and receptions.

{

1} “On” (default): The unit will print a journal report automatically after every

30 new fax transmissions and receptions (page 46)
I copyed it from the user manual.

Monty

[User Name]

It might be printing a report after every fax rec. Its in the user manual pg. 63

Printing a confirmation report

{#}{

4}{0}{1}
{0} Off: Confirmation reports will not be printed.

{

1} On: A confirmation report will be printed after every fax transmission.

{

2} Error(default): A confirmation report will be printed only when fax

transmission fails.

Setting the journal report to
print automatically

{#}{

4}{0}{2}
{0} Off: The unit will not print a journal report, but will keep a record of the
last 30 fax transmissions and receptions.

{

1} On(default): The unit will print a journal report automatically after every

30 new fax transmissions and receptions (page 46)
I copyed it from the user manual.

Monty

#401 is off and #402 is on and it prints out the journal every 30 faxes as it should so it's not those.

Thanks for the advice.

[mojorolla]

Sound like what is called "page numbering" and is usually in the user fax settings

[mkb]

Thank's for the info Monty

[User Name]

Actually, I resolved this problem already (I think?). #432 auto reduction was turned off. I turned it back on and haven't heard anything from the customer about it happening again since then.

Thanks.

[User Name]

Thank's for the info Monty

I thanked you for your advice. I didn't use your name, but I said thanks.