panasonic dp-3030

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • semaj
    PhilTech
    • Mar 2009
    • 28

    #1

    [Error Code] panasonic dp-3030

    hi there tech friends..pls help. i already replace d button battery on the dash of panasonic dp3030, and still the parameters i hd input is not stored in the memory, any advices? thanks
  • JustManuals
    Field Supervisor

    5,000+ Posts
    • Jan 2006
    • 9838

    #2
    This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from
    Just Manuals | The Internet's largest selection of manuals | Instant Downloads


    Paul@justmanuals.com

    Comment

    • mojorolla
      The Wolf

      2,500+ Posts
      • Jan 2010
      • 2583

      #3
      You can try a shipment set, all job clear and a firmware upgrade; in that order. I have seen a few Panasonic loose settings on several different models.
      Failing to plan is planning to fail!!!

      Comment

      • serviceman
        Technician

        50+ Posts
        • Jun 2009
        • 71

        #4
        When you say "dash" are you referring to the control panel? That battery doesn't keep anything powered to keep parameter settings. That batter is solely for the control panel operation. If you are loosing your parameters with after turning the device off, look at the battery on the board (I think SC Board).

        Comment

        Working...