[Misc] Panasonic DP190 settings

[xxmandingoxx]

allrighty, on the op panel of a DP 190 there are 3 settings Text / Text Photo / photo

this is the machine i use in my office lol, and the only way it works is if its set to TEXT or else copies are blurry, and ive replaced a bunch of stuff out of used machines and no luck but as long as it is on {TEXT} copy type, it prints great with good CQ

any way to set it so TEXT is always highlighted instead of always defaulting to text photo?

[mojorolla]

Press the COPY button on the left side of panel. Then FUNCTION, scroll to COPIER SETTINGS, hit the SET key, scroll up until you see KEY OP MODE, hit SET again, enter 3 zeros as the password (000), hit SET again, scroll down until you see ORIGINAL/HOME, hit SET again, press 1.Text, hit SET again to hold the setting. Hit the red stop key twice to get out. Should be good to go.

[xxmandingoxx]

thumbs up sir, thanks