error code E04-1 DP6010 !!!

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • thienquansgs
    • Jun 2025

    #1

    error code E04-1 DP6010 !!!

    hello everybody ! i am a technical for ricoh.i live in vietnam. my copy is panasonic DP 6010 .i see problem arlam E04-1. i was check thermistor ,thermotas , lamp ,and connect all good. when i switch power on then lamp fuser to open about 3 second and off concomitant arlam error code E04-1. i can't enter mode simulation with key "funtion + original size + 3 " in service handbook .what to do? please give me one solution good . thanks everybody .
  • tseto
    Technician

    50+ Posts
    • Jun 2007
    • 60

    #2
    e4=01

    Originally posted by thienquansgs
    hello everybody ! i am a technical for ricoh.i live in vietnam. my copy is panasonic DP 6010 .i see problem arlam E04-1. i was check thermistor ,thermotas , lamp ,and connect all good. when i switch power on then lamp fuser to open about 3 second and off concomitant arlam error code E04-1. i can't enter mode simulation with key "funtion + original size + 3 " in service handbook .what to do? please give me one solution good . thanks everybody .
    all panasonic products including Panafax needs to be reseted in service mode , even after a paper jam in the fuser. after repair do this

    enter service mode
    go to F9
    06... ram initialize
    04... LBP Fuser Reset
    answere "yes"
    power down when asked

    if E4=01 re occur, the problem is not fixed.

    Comment

    Working...