Panasonic DP-C354

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • okcopier
    Technician
    • Dec 2011
    • 13

    #1

    [Error Code] Panasonic DP-C354

    Can someone please tell me how to get into the service mode to reset fuser unit. I have already replaced the fuser unit and just need to reset the code. I am also doing a PM on this machine and is there anything else I need to reset besides the fuser code. Thank you in advance; your help will be appreciated.
  • JustManuals
    Field Supervisor

    5,000+ Posts
    • Jan 2006
    • 9838

    #2
    Re: Panasonic DP-C354

    This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from

    Just Manuals ~ The Internet's largest selection of manuals ~ Instant Downloads

    Paul@justmanuals.com

    Comment

    • copiman
      Technician

      500+ Posts
      • Sep 2011
      • 861

      #3
      Re: Panasonic DP-C354

      Originally posted by okcopier
      Can someone please tell me how to get into the service mode to reset fuser unit. I have already replaced the fuser unit and just need to reset the code. I am also doing a PM on this machine and is there anything else I need to reset besides the fuser code. Thank you in advance; your help will be appreciated.
      To reset you need to do F8-26 and F8-27. Do you have a service manual?

      Comment

      • okcopier
        Technician
        • Dec 2011
        • 13

        #4
        Re: Panasonic DP-C354

        How do I get into the diagnostic mode on this copier to use the reset codes you supplied me?

        Comment

        • PanaTech
          Technician

          50+ Posts
          • Dec 2008
          • 71

          #5
          Re: Panasonic DP-C354

          Function +Copy (below energy saving button) + 3
          svc pw default is:00000000 ( 8 zeros)

          I would also reset STR (2nd transfer roller), IT Belt....

          They are all in F8, scroll down the menu and just reset one by one.

          Comment

          Working...