I was told that it is possible to interchange some of these toners. Was wondering if anyone has done this? If so what procedures did you do and how did it work? The bottles are made diffrent. Did it tone properly? I'm told its the same toner. Anyway, thought I would reach out to those who have been down this road. No need to reinvent the wheel.
-
-
Re: Toner question for 35xx, 45xx, 60xx, 80xx
The 3510/20/30, 4510/20/30 & 6010/20/30 powders are all the same, 8035/45/60 powder formula is different. Therefore you can change the toner hoppers so they all accomodate the larger 6030 toner ctg for the 35/45 cpm machs & it will work fine. Better yield too on the larger ctg so this will lower your CPC & allow you to stock 1 toner ctg for all those machs. Most of the compatible sources sell a universal large ctg that will work in them all if you want to go that route. (Not the OEM though)
The 80 series machine toner formula are all by themselves so you can't interchange those..... -
Re: Toner question for 35xx, 45xx, 60xx, 80xx
Thanks Exit. I have seen that someone has cut out part of the hopper assy to allow the larger cartridge the ability to be inserted. Has anyone done this? Did it work ok?Comment
-
Re: Toner question for 35xx, 45xx, 60xx, 80xx
Sorry I'm late to the party, but yes, I can also confirm that removing part of the assembly works. We now only stock 2 B/W toner types.Comment
-
Re: Toner question for 35xx, 45xx, 60xx, 80xx
Thank you Pacman. Welcome back.Comment
Comment