Panasonic vs. Canon Finisher

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • copiman
    Technician

    500+ Posts
    • Sep 2011
    • 861
    #1

    Panasonic vs. Canon Finisher

    I have a finisher from a Canon IR6000 that looks identical to the Panasonic DA-FS600 finisher. The plug on the Canon is not the same as the Canon. Just wondering if anyone has substituted the Canon for the Panasonic. Of course I would need to change the harness going from the finisher to the copier, which I have. Wanted to check to see if it has been done instead of trying it and maybe blowing a board.
    Tags: None
    • Billy Bob
      USMC
      • May 2011
      • 51
      #2
      Re: Panasonic vs. Canon Finisher

      Originally posted by copiman
      I have a finisher from a Canon IR6000 that looks identical to the Panasonic DA-FS600 finisher. The plug on the Canon is not the same as the Canon. Just wondering if anyone has substituted the Canon for the Panasonic. Of course I would need to change the harness going from the finisher to the copier, which I have. Wanted to check to see if it has been done instead of trying it and maybe blowing a board.
      i also have same items, and was thinking the same way, if time is not is not a problem i will try this week and let u know.

        Comment

        • copiman
          Technician

          500+ Posts
          • Sep 2011
          • 861
          #3
          Re: Panasonic vs. Canon Finisher

          Thanks Billy Bob. Let me know what you find out.

            Comment

            • mojorolla
              The Wolf

              2,500+ Posts
              • Jan 2010
              • 2569
              #4
              Re: Panasonic vs. Canon Finisher

              I would think the differences in firmware would make this impossible. Please let us know how it works out.


              Failing to plan is planning to fail!!!

                Comment

                • kronical
                  Kronic Copier Ninja

                  100+ Posts
                  • Nov 2009
                  • 230
                  #5
                  The mechanics would be the same but you would have to swap over boards.

                    Comment

                    • onetek
                      Trusted Tech

                      250+ Posts
                      • Apr 2009
                      • 318
                      #6
                      Re: Panasonic vs. Canon Finisher

                      You would also need pn 4G1-5215-000 IPC I/F Board, the interface board for the pana.
                      Th.

                        Comment

                        • Billy Bob
                          USMC
                          • May 2011
                          • 51
                          #7
                          Re: Panasonic vs. Canon Finisher

                          Originally posted by copiman
                          Thanks Billy Bob. Let me know what you find out.
                          Tried to make a Canasonic finisher... it didn't work.

                          (Switched the cords. No success.)

                            Comment

                            • mojorolla
                              The Wolf

                              2,500+ Posts
                              • Jan 2010
                              • 2569
                              #8
                              Re: Panasonic vs. Canon Finisher

                              Switch the eeprom chips.


                              Failing to plan is planning to fail!!!

                                Comment

                                Previous template Next
                                Working...