panisonic DP 3030

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • kmtech
    Trusted Tech

    Site Contributor
    100+ Posts
    • Sep 2008
    • 125
    #1

    panisonic DP 3030

    I had a power problem with a 3030 and got 04-01 code and its a new fuser unit. would appreciate any help. thanks in advance.
    Tags: None
    • mojorolla
      The Wolf

      2,500+ Posts
      • Jan 2010
      • 2584
      #2
      Re: panisonic DP 3030

      Go into service mode, F9 and run LBP fuser reset. The code is most likely left over from the bad fuser. If code does not clear after reboot, you could have a bad thermo/thermi or a broken lamp.


      Last edited by mojorolla; 10-02-2012, 02:43 AM.
      Failing to plan is planning to fail!!!

        Comment

        • kmtech
          Trusted Tech

          Site Contributor
          100+ Posts
          • Sep 2008
          • 125
          #3
          Re: panisonic DP 3030

          Hey Moho, thanks that was easy.

          Bill

            Comment

            • mojorolla
              The Wolf

              2,500+ Posts
              • Jan 2010
              • 2584
              #4
              Re: panisonic DP 3030

              Any E4 error are cleared that way.
              Glad to help!


              Failing to plan is planning to fail!!!

                Comment

                • kmtech
                  Trusted Tech

                  Site Contributor
                  100+ Posts
                  • Sep 2008
                  • 125
                  #5
                  Re: panisonic DP 3030

                  thanks much!!!

                    Comment

                    Previous template Next
                    Working...