Panasonic DP-3530 - How to Configure Network Printer

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • mfdarvesh
    Technician
    • Apr 2011
    • 24
    #1

    Panasonic DP-3530 - How to Configure Network Printer

    Panasonic Copier DP-3530

    This copier is recently shifted to my Wing, specially for low cost printing. The copier is working good and am able to to give a manual IP Address which was successful and machine is pinging from laptop.

    Please help me how may I configure printer using LAN. Laptop is connected through LAN Cable to Copier.
    Panasonic Communication Utility and Panasonic Document Manger have been downloaded from following link and installed on laptop:

    Code:
    http://panasonic.net/pcc/support/mfp/

    Please help me ....
    Tags: None
    • copiman
      Technician

      500+ Posts
      • Sep 2011
      • 861
      #2
      Re: Panasonic DP-3530 - How to Configure Network Printer

      Open Communication utility and enter the key name you want to appear on the copier for scanning. You should now be able to scan. Have not really used Document manager, but I don't think you really need to do anything there. Load print driver and you should be printing as well. The Panasonic website you went to has op manuals for this stuff as well.

        Comment

        • mfdarvesh
          Technician
          • Apr 2011
          • 24
          #3
          Re: Panasonic DP-3530 - How to Configure Network Printer

          Thanks
          Scanner option is not installed in the Machine, when I press Scan Button on Machine, it says "Option Not Installed"
          but Printer is installed as told by the guy who installed machine in my Wing.

          The manual on the website don't have configuration guide, just information and screenshots

          I have tried this, put the name but communication utility is unable to register the machine. Moreover, may I need to configure a Port for printer, I mean how can I detect the printer device to driver ???

          Originally posted by copiman
          Open Communication utility and enter the key name you want to appear on the copier for scanning. You should now be able to scan. Have not really used Document manager, but I don't think you really need to do anything there. Load print driver and you should be printing as well. The Panasonic website you went to has op manuals for this stuff as well.

            Comment

            • copiman
              Technician

              500+ Posts
              • Sep 2011
              • 861
              #4
              Re: Panasonic DP-3530 - How to Configure Network Printer

              Well, if scanning option is not installed, you will not be able to scan. So, the communication utility and document manager is not needed. You can unistall them because you do not need them. As far as printing. Download the GDI print driver for your machine. There is an installation guide there as well showing how to install it. If you are not versed on how to install the driver, and the instruction book does not help, I would suggest you find someone who is local to assist you. Good luck.

                Comment

                • mfdarvesh
                  Technician
                  • Apr 2011
                  • 24
                  #5
                  Re: Panasonic DP-3530 - How to Configure Network Printer

                  Thank you
                  Previously I have downloaded PCL driver not GDI, so I will now downloading GDI driver and will install, let me share results.

                  Yes, local vendor is here, but I am unable to catch him, either he is too busy or "look busy do nothing", so I tried myself, so that a good penalty should be fixed on him ...

                  Originally posted by copiman
                  Well, if scanning option is not installed, you will not be able to scan. So, the communication utility and document manager is not needed. You can unistall them because you do not need them. As far as printing. Download the GDI print driver for your machine. There is an installation guide there as well showing how to install it. If you are not versed on how to install the driver, and the instruction book does not help, I would suggest you find someone who is local to assist you. Good luck.

                    Comment

                    • kashif
                      Technician
                      • Apr 2013
                      • 45
                      #6
                      Re: Panasonic DP-3530 - How to Configure Network Printer

                      If u already installed driver in ur laptop and this is not working then go to printers and faxes, and go to properties of printer 3530 and then go to configure and select LPR and write lpr1 and check i hope it will work.

                        Comment

                        • mfdarvesh
                          Technician
                          • Apr 2011
                          • 24
                          #7
                          Re: Panasonic DP-3530 - How to Configure Network Printer

                          Thanks, I will try it tomorrow and will reply about results ...

                          Originally posted by kashif
                          If u already installed driver in ur laptop and this is not working then go to printers and faxes, and go to properties of printer 3530 and then go to configure and select LPR and write lpr1 and check i hope it will work.

                            Comment

                            • mfdarvesh
                              Technician
                              • Apr 2011
                              • 24
                              #8
                              Installation Successful

                              Thanks for help friends

                              I am able to install the GDI Driver for this machine and now machine is communicating with laptop and printing as well.

                                Comment

                                Previous template Next
                                Working...