Parts for Pan. 3030

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • kmtech
    Trusted Tech

    Site Contributor
    100+ Posts
    • Sep 2008
    • 125
    #1

    Parts for Pan. 3030

    Help, I have a Pan. 3030 I just put new rollers in the fuser and am getting a E4-01 it seems to be a thermistor, i tested them and getting a reading on the two pin thermistor but no reading on the four pin. does any one have these on hand? I should have replaced them, I know!
    thanks
    Bill
    Tags: None
    • mojorolla
      The Wolf

      2,500+ Posts
      • Jan 2010
      • 2569
      #2
      Re: Parts for Pan. 3030

      Go into F9 service mode and reset the code with LBP Reset, reboot and code should disappear.


      Failing to plan is planning to fail!!!

        Comment

        • kmtech
          Trusted Tech

          Site Contributor
          100+ Posts
          • Sep 2008
          • 125
          #3
          Re: Parts for Pan. 3030

          Originally posted by mojorolla
          Go into F9 service mode and reset the code with LBP Reset, reboot and code should disappear.


          Thanks aloott!!! I have the field service book and did not find that it had a reset for fuser. i will try and let you know,

          Bill

            Comment

            • kmtech
              Trusted Tech

              Site Contributor
              100+ Posts
              • Sep 2008
              • 125
              #4
              Re: Parts for Pan. 3030

              Originally posted by mojorolla
              Go into F9 service mode and reset the code with LBP Reset, reboot and code should disappear.


              I did run it and it worked, i guess when i scanned the book i was looking for fuser in wrong place, anyway it worked find, are you a pan dealer and would you like to sell me parts for this machine?
              Thanks again.
              Bill

                Comment

                Previous template Next
                Working...