Panasonic DP-C264 Password Issue

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Reprint01
    • Jul 2025
    #1

    Panasonic DP-C264 Password Issue

    Hi Guys,

    I recently brought a DP-C264 at an auction, when I bought it home it is requesting a password when I select the copy button.

    Also I can access the service mode but then are asked to enter a password...

    Is there anyway to reset this machine to the default passwords?

    Thanks in advance
    Ronald
    Tags: dp-c264, issue, panasonic, password
    • JustManuals
      Field Supervisor

      5,000+ Posts
      • Jan 2006
      • 9838
      #2
      Re: Panasonic DP-C264 Password Issue

      This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:


      http://www.justmanuals.com



      Paul@justmanuals.com

        Comment

        • mjunkaged
          Trusted Tech

          250+ Posts
          • Feb 2009
          • 383
          #3
          Re: Panasonic DP-C264 Password Issue

          Originally posted by Reprint01
          Hi Guys,

          I recently brought a DP-C264 at an auction, when I bought it home it is requesting a password when I select the copy button.

          Also I can access the service mode but then are asked to enter a password...

          Is there anyway to reset this machine to the default passwords?

          Thanks in advance
          Ronald
          Tried removing the battery? I think there's one in the control panel, but without looking in a manual, I cannot be sure. Power down rear power and wait 60 sec., remove battery, wait another 60......???

            Comment

            • User Name
              Awesome Sauce

              250+ Posts
              • Nov 2009
              • 405
              #4
              Re: Panasonic DP-C264 Password Issue

              Turn off departmental counters. Go to the functions menu, then general settings, scroll down to the bottom to key operator mode. The settings for departmental counters is in there somewhere, I forget the exact numbers now. The default code is 0000 to enter the key operator mode.
              Just because you're not paranoid doesn't mean they're not out to get you.
              O.o

              WARNING: My profile page can cause blindness in small children and old copier techs. View at your own risk.

                Comment

                • dannydub
                  Technician
                  • Feb 2014
                  • 16
                  #5
                  Re: Panasonic DP-C264 Password Issue

                  Try 00000000 or 19660000 or 00001966

                  Good luck

                    Comment

                    • tonerleak
                      Technician

                      50+ Posts
                      • Mar 2012
                      • 67
                      #6
                      Re: Panasonic DP-C264 Password Issue

                      The older Panasonics used 0000, the newer ones use 0000 0000, and some that have a security kit installed use 12345678 as a password. hope this is useful.

                        Comment

                        • tnrtt
                          Trusted Tech

                          100+ Posts
                          • May 2013
                          • 156
                          #7
                          Re: Panasonic DP-C264 Password Issue

                          Originally posted by Reprint01
                          Hi Guys,

                          I recently brought a DP-C264 at an auction, when I bought it home it is requesting a password when I select the copy button.

                          Also I can access the service mode but then are asked to enter a password...

                          Is there anyway to reset this machine to the default passwords?

                          Thanks in advance
                          Ronald
                          Default password is 00000000 for key op and service mode. If service mode password has been changed, you need a new SC PCB. If you can access service mode, go to F5-42, select no. Exit service and it shouldn't ask for a code any more.

                            Comment

                            • Reprint01
                              #8
                              Re: Panasonic DP-C264 Password Issue

                              Hi Guys,

                              Thank you for your help, I have managed to remove the password as per the information supplied.

                                Comment

                                Previous template Next
                                Working...