Panasonic FP7718 help

[Guest]

I have a Panasonic FP7718 copier which was donated. Copier has a copy access code enabled and I have went back to orig owner who swears code is 068 but it does not respond. Does anyone have a service acces code for this model so I can get into tools and resolve the issue. Any other suggestions would also help.

thanks

[just a tech]

Press and hold "user preset", "original size", and the number "3" simultaneously. Afterward, ya should see "F1". Press the "5" button and "start". Then ya should see a "C" come up. Then press enter "42" and "start".. You will probably see a value of "2" in the LED display. Press "0" and "start". To exit this mode you'll have to press "user preset" and "clear" simultaneously. All of this is off of memory so please forgive it's shitty directions but the object of the idea is to disable the copy access codes function.. hope it helps..

[dispatcher]

Panasonic FP7718 help

Thanks a lot
that should get us on the road.

[nilsonmorales]

i have the manual

add to your msn contac nilsonmorales@hotmail.com