Panasonic DP 8060

[Naveed Shahid]

Hello every body i am a toshiba technician i live in saudia arabia my copier is panasonic dp 8060 i have a problem alaram E-04-1 i enter mode simulation with key ''Function + Original Size + 3 '' in service handbook when i enter a mode machine asking a password for service mode what to do ? plz give me one solution good

my email address is naveedindigo@yahoo.com

[gordie]

Hi

The fault is

E4- 01 Fuser Warm-up Temperature 1. Fuser Thermistor is dirty.
2. Thermistor position is incorrect.
3. Fuser temperature is low. (Adjust F6-31)
4. Thermistor is defective.
5. Fuser Lamp connector is disconnected.
6. Fuser Thermostat is defective.
7. Fuser Lamp is defective.
8. HTC PCB connector is disconnected.

9. HTC PCB is defective.

for the code try 00000000

Gordie

[fausto1981]

yeah its 8 zeros 00000000

[Naveed Shahid]

Very Thank full

i am very thanksfull for u both solve the problem ok bye bye

Naveed