DP 6030 won't print from network

[theengel]

I allowed DHCP to configure this machine. Then I turned DHCP off and confirmed that it was on the network still. I can ping the machine. I installed the vista 64 bit PLC drivers on a Windows 7 machine. When I send something to print, the job stays in the queue for a few seconds (the way it normally would) and then disappears--as if it's been printed.

But the machine never prints anything.

Thanks for any suggestions.

[mojorolla]

Re: DP 6030 won't print from network

PCL was on option on that machine. You can run the F9 Machine Information report to show what options are installed or install the GDI print driver.

[theengel]

Re: DP 6030 won't print from network

Looks like that was the problem.

Thanks