mpc3500 wobbly line

[patrick045]

when i make a copy with a mpc3500 the top line is wobbly in the middle , whereas it was straight before .

any solutions ?

thx in advance

Pat

[Zaxxon]

Re: mpc3500 wobbly line

Please provide a sample picture if possible

[rosspt]

Re: mpc3500 wobbly line

Going just by the description wobbly is pretty vague, I would suggest trying to isolate the issue to a certain function first. Is it just on copies, or on prints as well. If it is on copy only, it's an optic issue. Clean glass and mirrors. If it is on prints as well as copies, then isolated it to a certain colour or on all colours. If just one colour then clean laser glass or look for an issue with the drum or dev unit of affected colour. If on multiple colours you might have a laser unit, image transfer unit or fusing unit issue.

If asking for help please put as much info into your post as possible as you will get better responses trying to help you rather than people just asking you to clarify or skipping past your post.

[sandmanmac]

Re: mpc3500 wobbly line

Please provide a sample picture if possible

x2
No kidding! Talk about asking people to look into a crystal ball.
And maybe also tell us if it happens for printing as well? Colour? B&W only? ETC.

Edit: Rosspt beat me by a couple minutes and is apparently far more polite than I

[slimslob]

Re: mpc3500 wobbly line

Please provide a sample picture if possible

x2
No kidding! Talk about asking people to look into a crystal ball.
And maybe also tell us if it happens for printing as well? Colour? B&W only? ETC.

Edit: Rosspt beat me by a couple minutes and is apparently far more polite than I

That makes three of us. For anyone else, anytime you see likes to a request for additional information it means that those liking post agree.

[NeoMatrix]

Re: mpc3500 wobbly line

Sounds like a policemans sobriety test.
Driver: I can't walk a wobbly line.
Policeman: Oh!. I'll make the line wobbly so you can walk it straight then.

All jokes aside.
Remove the damp paper out of the trays an it may fix your wobbly line.
You could have a bent or proud static comb around the 2nd tranfer unit...