error code sc440 what is the most commonly found problem
associated with this code ?
associated with this code ?
-
-
Main drive motor is faulty, I've replaced a few of these brushless motors on these models for SC440.
Check you can turn the motor freely by hand first though, as there is a outside chance it could be to much load.
But 99% of time it turns out to be a faulty motor/PCB.- Knowledge not shared, is eventually knowledge that becomes lost... like tears in the rain.
Fully qualified technician for Ricoh - Canon - Sharp - HP - Brother - Knowledge not shared, is eventually knowledge that becomes lost... like tears in the rain.
-
Mick is right but also check the ITB cleaning unit as I have had these block up and give this code.Comment
Comment