Ricoh MP C5503 SC544-02 code

[TonerMunkeh]

Re: Ricoh MP C5503 SC544-02 code

If you take the top and bottom covers off the fuser, look at the right hand side of where the lamps plug into. There's a little vertical slot the fuse fits in. It plugs into a two pin connector on the bottom of the black plastic frame.

[Luis Bartra]

Re: Ricoh MP C5503 SC544-02 code

When the c5502 was new I used to run into the Sc544 a lot, but I haven't seen it in years now.

Here's a pub I think I got here on CTN that always worked for me. I still carry an old Tmistor in my bag, even though I don't know when I last used it.
~[ATTACH]30406[/ATTACH

Thanks about this information


Enviado desde mi iPad utilizando Tapatalk

[KOSTAS1975]

No need for fuae i always reser sc 544 or 545 simly by using a self made cable with actuator from sorter of ricoh models,Wile doimg hard temp reset 5-810-2 i first remove the upper cover of hot unit ,plug my cable in the fuse connector of the unit .Then having the switch to on i press execute and then release the switch..You can make a reaet cable switch simly by using a double cable from a scrap machine and a switch located on side doors or trays ,mine is from old mpc2500 but they are very common in all ricoh models .i never spent money on reser fuses...same action i use in mp4054 or 3055 series,works for me just fine.