airprint mp c2003

[LNorris]

not finding any clear answers on this.

will c2003 support airprint, if so what is required from copier side and user side. anyone have instructions for setup?

[Moza]

Re: airprint mp c2003

not finding any clear answers on this.

will c2003 support airprint, if so what is required from copier side and user side. anyone have instructions for setup?

Yes it will as long as Bonjour and IPP are enabled on the copier, as far as user side they just need to be connected to the same wireless network as the copier

[Zaxxon]

Re: airprint mp c2003

https://support.apple.com/da-dk/HT201311

[Getoner]

Re: airprint mp c2003

not finding any clear answers on this.

will c2003 support airprint, if so what is required from copier side and user side. anyone have instructions for setup?

1 Check Firmware is proper ( different firmware for SOP / NOP ) check TSRC

The rest can be set / configured thru WIM

2 Mobile device & MFP must be on same sub network
3 must use SSL connection ( SSL/TLS & TLS1.2 active ) Ciphertext
4 device certificate must be installed

[Brianneoe]

Re: airprint mp c2003

As of July 1 Apple changed their dh key for the new IO 8.4 from 512 to 1024/2080.If your end users are using this IO you will need to get the NCU firmware updated for airprint to work

[Zeldaman]

[tonnerboy]

Re: airprint mp c2003

Hello.
I am facing this thread with my Mettis MPc2003. I cannot find the device by Bonjour. Even with the Smart Device Print&Scan.
I checked that the Bonjour and the IPP are enable. And I enable the device certification (like suggested before)
I have a MPc4502 and I can find it with Bonjour.
Can someone give me an idea? My costumer want to find the device without insert the IP address.