Ricoh Aficio MPC 4500 SC 290
Collapse
X
-
Tags: None
-
Re: Ricoh Aficio MPC 4500 SC 290
English, please.
Dear,
This is to please ask for their support and help.
I have a photocopier Ricoh Aficio MPC 4500 with error SC 290, Segui several posts in the forum relating to the error and follow the instructions given.
Turn off the engine and remove the small metal arm that operates the sensors that open and close the shutter.
It is necessary to reset the error?
Any idea continues to show me the error SC 290.
Greetings!NEVER ASSUME ANYTHING -
Re: Ricoh Aficio MPC 4500 SC 290
English, please.
Dear,
This is to please ask for their support and help.
I have a photocopier Ricoh Aficio MPC 4500 with error SC 290, Segui several posts in the forum relating to the error and follow the instructions given.
Turn off the engine and remove the small metal arm that operates the sensors that open and close the shutter.
It is necessary to reset the error?
Any idea continues to show me the error SC 290.
Greetings!NEVER ASSUME ANYTHINGComment
-
Comment
-
Re: Ricoh Aficio MPC 4500 SC 290
1. Check or replace the harness.
2. Replace the shutter on the laser optics housing unit.
3. Replace the shutter motor.
4. Replace the shutter close sensor.
5. Replace the IOBLive for yourself and you will live in vain. Live for others, and you will live againComment
-
Re: Ricoh Aficio MPC 4500 SC 290
Place the shutter assembly! It is difficult to remove? Will have at hand the steps to do? I'm tired of looking for technical and would not solve the problem. You have helped me with their advice, thank you very much!Comment
-
Re: Ricoh Aficio MPC 4500 SC 290
this sp found in Mpc 2500 not Mpc 4500.Attached FilesComment
-
Re: Ricoh Aficio MPC 4500 SC 290
Friends, will have by chance a picture assembly sutter please? Not the manual parties to reach me best!Comment
-
Re: Ricoh Aficio MPC 4500 SC 290
OK, here's my last attempt at help on this.
1. Open the manual to the replacement and adjustment section
2. Remove the laser assy following the procedure in the manual
3. Remove the big metal plate on top of the laser assy, leave the springs and arms attached
4. Reinstall the laser assy
5. If this was what was actually causing the code, the job is completeNEVER ASSUME ANYTHINGComment
-
Re: Ricoh Aficio MPC 4500 SC 290
OK, here's my last attempt at help on this.
1. Open the manual to the replacement and adjustment section
2. Remove the laser assy following the procedure in the manual
3. Remove the big metal plate on top of the laser assy, leave the springs and arms attached
4. Reinstall the laser assy
5. If this was what was actually causing the code, the job is complete
I removed the metal plate you see in the picture! Keeps throwing error! Thank you very much for your help!
IMG-20150928-WA0008.jpgComment
-
Re: Ricoh Aficio MPC 4500 SC 290
That's the one. Glad you got er figured out.NEVER ASSUME ANYTHINGComment
Comment