Hello
Machine : Pro C 901 has buffer ( cooling unit) and sr500 finisher on it.
Fault: 901 main frame ( engine) working fine......however does not see sr5000 finisher . Does see the buffer. on diaplay panal.
SR5000 + buffer fires up and initializes fine. 901 does not see finisher when doors are open. But does see buffer when door open.
What have i done so far: Plugged SR5000 into another machine and all works fine. Tried another SR5000 and still get the same fault. Checked voltage all okay.
Cleared NVRAM - made no different. pluged both SR5000 into teh machine direct , still no joy but Initializes fine.
Planed action for revisit..... ordered IOB2 and nvram. power supply
forgot to order FIB finisher interface board.
Any ideas. all welcome
Machine : Pro C 901 has buffer ( cooling unit) and sr500 finisher on it.
Fault: 901 main frame ( engine) working fine......however does not see sr5000 finisher . Does see the buffer. on diaplay panal.
SR5000 + buffer fires up and initializes fine. 901 does not see finisher when doors are open. But does see buffer when door open.
What have i done so far: Plugged SR5000 into another machine and all works fine. Tried another SR5000 and still get the same fault. Checked voltage all okay.
Cleared NVRAM - made no different. pluged both SR5000 into teh machine direct , still no joy but Initializes fine.
Planed action for revisit..... ordered IOB2 and nvram. power supply
forgot to order FIB finisher interface board.
Any ideas. all welcome
Comment