Create Scanned Folder SAVIN 2525

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • dariustrucker

    #1

    Create Scanned Folder SAVIN 2525

    Hi, I need help on how to create/delete scanned folder in SAVIN 2525.


    thanks,
    dan
  • schooltech
    School District Tech

    500+ Posts
    • Jun 2008
    • 504

    #2
    Scanrouter lite will need to be used with this model. Have you used the program before?

    The 40 series of Savin will allow for SMB scanning, but the 25 series requires Scanrouter lite, or Scanrouter Pro.
    Bachelor of Science in Information Technology, Comptia A+, Comptia Network+

    Comment

    • Fearless V K
      Senior Tech

      500+ Posts
      • May 2007
      • 620

      #3
      I think he's talking about a C2525, as there is no b&w 2525. If that is the case, then it does support embedded SMB scanning, and you would be able to use a shared folder.

      Create a new folder, right click it, select sharing, then tell it to share the folder. Make sure your permissions are set to fully allow modification of the folder by everyone (all users), click OK.

      Sorry if I left out a few details. Different operating systems may vary slightly, but that's the general idea of how to do it.
      Don't take that toner with me!

      Comment

      • schooltech
        School District Tech

        500+ Posts
        • Jun 2008
        • 504

        #4
        Oops, I did read it wrong. Sorry. I had 2527 in my head when I was writing it.

        When you set up the SMB share, I generally set it up in the root directory, so you don't have to path it too long. You'll see what I'm talking about in the setup.

        If you run into any issues, post them and we can better help. There are some good posts on Scanning with XP and Vista on this forum.
        Bachelor of Science in Information Technology, Comptia A+, Comptia Network+

        Comment

        Working...