Hey everyone,
Wenever the ardf, product code b802, is used, the copier shuts down and the main power light is lit. I have to shut off main power switch to get the copier to work again. Iob, psu, bicu, controller and ardf board have been changed with no positive results. I have checked wire harnesses and connections and all appear to be working properly. The firmware is up to date.
Any suggestions as to what I should do next.
Thanks in advance
Sent from my GT-N5110 using Tapatalk
Wenever the ardf, product code b802, is used, the copier shuts down and the main power light is lit. I have to shut off main power switch to get the copier to work again. Iob, psu, bicu, controller and ardf board have been changed with no positive results. I have checked wire harnesses and connections and all appear to be working properly. The firmware is up to date.
Any suggestions as to what I should do next.
Thanks in advance
Sent from my GT-N5110 using Tapatalk