Pro C900 Oil Application

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • bat
    Trusted Tech

    100+ Posts
    • Sep 2008
    • 138
    #1

    Pro C900 Oil Application

    Hi all...

    I have a problem with Oil Application Unit, it gets damaged on front end, after second we replaced on one machine I thought there is something wrong with fuser, but now, we have 4 different machines on field and all have same problem, Oil Application Unit cant last more than 50k without damage. I cant see any problem with fusers, even with damage, prints are fine, there is no oil marks. What am I missing?
    Attached Files
    Tags: None
    • jfbar1
      Technician

      50+ Posts
      • Oct 2008
      • 53
      #2
      Re: Pro C900 Oil Application

      The tension springs that hold it against the belt are DIFFERENT front and rear. If memory serves, the black one goes on the rear. Double check the tech bulletins for more info. Also, make sure you DUMP a lot of fuser oil in the holes in the cover when assembled to "prime" the belt.

        Comment

        • Gary Bowen
          Bowdog

          250+ Posts
          • Mar 2008
          • 250
          #3
          Re: Pro C900 Oil Application

          Black Spring - FRONT; Silver Spring - REAR. I doubt they are the cause of your problem though. Check that there isn't a screw that is the wrong length somehow pressing into the Oil Application Roller.

            Comment

            Previous template Next
            Working...