sc741 mp6001

[vargue]

Hi fellas today my customer called me and tell me that stapler hanged up first stapler didn't move I entered to sp mode and motor is working move until home position sensor .but stapler skew not turn I replaced it.but no avail.any clue and it revealed after machine switch on .it's make misfeed j 112 and r5+r8

[MIKON]

Re: sc741 mp6001

Its either the sensor under the stapler mount or the harness P/N B7005368

[vargue]

Re: sc741 mp6001

finally it's finisher pcb .