I have new firmware, changed the turn over section twice with a good working one from another machine,, The turnover section is making me crazy... I have ran the papers through it portrait not mixed , its fine, landscape with mixed originals its a dog that needs to be shot! Is there anything else i can check, or replace before i through this thing in the bay?
It jams when one paper is still in the turn over section and has not exited before the next paper comes into it and its jammed, there is always two pieces of paper in the turn over section when this occurs
the guides are not broken, or missing any springs, the feed teeth are not broken either
Please any ideas before i change it out completely
It jams when one paper is still in the turn over section and has not exited before the next paper comes into it and its jammed, there is always two pieces of paper in the turn over section when this occurs
the guides are not broken, or missing any springs, the feed teeth are not broken either
Please any ideas before i change it out completely