I need to connect this machine to @remote. I am not seeing where to enable the GW controller to allow this. Since this a printer only model with the fifth station for white or clear toner the service manual says printing via the gw controller is not possible. But is there still a way to configure it for @remote? It's is a M208 Pro C7110x.
-
-
Re: How Do I configure @remote on a Ricoh Pro C7110X with a Fiery Attached?
If it still has a GW NIC SP5985-001 will bring it back to life. It's just a matter of configuring the machine with an IP then all should be spiffing.It's 106 miles to Chicago. We've got a full tank of gas, half a pack of cigarettes, it's dark and we're wearing sunglasses.
Hit it.
Comment