I need an older engineer l think for this one. Had to go to Customer with Ricoh 1018d very old machine havn't seen one before but insists he wants it fixed. SC541 error. Found suggestions on line to replace thermistor which l have done however when l have gone to reset sc error, wont let me, just flashes up error in display. Any ideas?. One or two suggestions about power supply or main board, shouldn't think they are available though. Any help as always appreciated
-
-
I Used To Live To Fix Things Now i Fix Things To Live -
Re: ricoh 1018d
The older models have a very odd reset procedure. Excerpt from service manual attached.
s_af1015.pdfIt's 106 miles to Chicago. We've got a full tank of gas, half a pack of cigarettes, it's dark and we're wearing sunglasses.
Hit it.Comment
-
Re: ricoh 1018d
Thanks for that. I thought it may be something like a board or nvram prob. Doubt l can get a machine or board now will have a look around might be something in the antiques shop!! Thanks againComment
-
Re: ricoh 1018d
thanks for that. Havn't tried that, i have reset as suggested on web sit, press 1 and OK and then getting ERROR, as you mentioned so l will give your suggestion a go. hope it works. Will make the Customer happy and save me some grief trying to get bits!!Comment
Comment