If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Hi guys,hope you can help.I am about to set up this m/c with the fax option and need to set the rings to eight to answer,can anyone help with this procedure,thanks in advance.
Hi guys,hope you can help.I am about to set up this m/c with the fax option and need to set the rings to eight to answer,can anyone help with this procedure,thanks in advance.
The magic book says:
Ncu parameter:680576
Number of rings until a call is detected
Default: 1
SP2-103-007 (parameter 06).
The setting must not be zero.
Ncu parameter:680576
Number of rings until a call is detected
Default: 1
SP2-103-007 (parameter 06).
The setting must not be zero.
I resume this post, for help. I have the same problem, I should increase the number of rings. But I don't understand how to do it.
Can someone help me?
What should I press on the menu?
TnX Luca
I resume this post, for help. I have the same problem, I should increase the number of rings. But I don't understand how to do it.
Can someone help me?
What should I press on the menu?
TnX Luca
ok
Comment