Energy saver aficio mp2501

[Ronan]

hello, I have a problem with a mp 2501 aficio, when booting, you will pass energy saver, and not leave there, do nothing, try updating the firmware but can not, will not start, some help with this model, worse it is the only machine that I have that model, thanks

[ruben]

Re: Energy saver aficio mp2501

Could be a faulty HDD, if you remove the controller, unplug the HDD, and boot it up. After a while (it will take a while) it should boot normally. If it does, replace or reformat the HDD.