If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Hello, I'm still the problem of the machine (MP 2501) not turn on, only light energy saver is on, the scanner is checked, turn on the lamp, but do not start the engine, try updating the firmware but can not ; the main board? any help?
Hello, I'm still the problem of the machine (MP 2501) not turn on, only light energy saver is on, the scanner is checked, turn on the lamp, but do not start the engine, try updating the firmware but can not ; the main board? any help?
We had one like this out of the box. turned out to be a bust controller. Replaced the controller with new one after transplanting NVRAM from dead board and all was well. Service manager cried over the cost of the board though...
Comment