[Error Code] RICOH MPC 6502 SC 371

[Dev]

Hi everyone.First sorry my English. I have a MPC 6502(CHARIS office) that shows sc 371-01(02)(03). Basically the manual says that the ID sensors doesn't work. First I replaced ID sensors without sucess, then I checked the ITB assy,BCU,IOB in other machine and they works. I just ordered the frame connectors and wires and I'll test again. I've disable all types of process control but I haven't managed to print a single sheet yet. Any suggestions will be appreciated.

Thank you.

[jaime3gz]

Re: RICOH MPC 6502 SC 371

Hi everyone.First sorry my English. I have a MPC 6502(CHARIS office) that shows sc 371-01(02)(03). Basically the manual says that the ID sensors doesn't work. First I replaced ID sensors without sucess, then I checked the ITB assy,BCU,IOB in other machine and they works. I just ordered the frame connectors and wires and I'll test again. I've disable all types of process control but I haven't managed to print a single sheet yet. Any suggestions will be appreciated.

Thank you.

What was the FINAL SOLUTION?

Thank You