Hi Guys,
Can someone please assist me with the correct setup to be able to print a banner on a MPC3003 (want to print 1200mm) . The machine does not allow me to exceed the paper size 600mm in length ,
not from the driver nor the machine. I have tried different drivers including the postscript but as soon as you print , machine comes up with paper jam from the bypass. I have seen this been done
on a you tube video
, so this machine can do it. Any help in this matter will be highly appreciated.
Thanks
Can someone please assist me with the correct setup to be able to print a banner on a MPC3003 (want to print 1200mm) . The machine does not allow me to exceed the paper size 600mm in length ,
not from the driver nor the machine. I have tried different drivers including the postscript but as soon as you print , machine comes up with paper jam from the bypass. I have seen this been done
on a you tube video
Thanks