mpc5503 with sc721-70 error

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • T911
    Senior Tech

    500+ Posts
    • Jun 2007
    • 628
    #1

    mpc5503 with sc721-70 error

    anyone have the bulletin for the wiring harness not routed properly they can share for this error on this sr3150 finisher attached to the c5503. thx much
    Tags: None
    • limo
      Trusted Tech

      100+ Posts
      • Jun 2008
      • 103
      #2
      Re: mpc5503 with sc721-70 error

      SC721-70 for SR3159 is due to a overtightened screw resulting in deformation of theside plate tray.
      Rerouting the wires is for the internal finisher for the SC724-86 error

        Comment

        • T911
          Senior Tech

          500+ Posts
          • Jun 2007
          • 628
          #3
          Re: mpc5503 with sc721-70 error

          Originally posted by limo
          SC721-70 for SR3159 is due to a overtightened screw resulting in deformation of theside plate tray.
          Rerouting the wires is for the internal finisher for the SC724-86 error
          this is a sr3140 finisher

            Comment

            • TonerMunkeh
              Professional Moron

              2,500+ Posts
              • Apr 2008
              • 3865
              #4
              Re: mpc5503 with sc721-70 error

              You put 3150 on the OP.
              It's 106 miles to Chicago. We've got a full tank of gas, half a pack of cigarettes, it's dark and we're wearing sunglasses.

              Hit it.

                Comment

                Previous template Next
                Working...