MPC6502 with Finisher SR4100

[GeorgeBest]

Hello,

There's a problem with stapler jobs printing & copying.
When making small sets below 10 pages it works fine, but
when making sets with 10 pages or more, sometimes the sets are in disorder, see the picture !
Some pages are out of place resulting a set where 2 pages falls out . . . !!

Can't see what is causing this, it happens mostley around page 15-17, or 21-22, random . . . mostley 2 pages out of place. ?

Someone a clue here, don't have much experience on this model.

Thanks in advanceIMG_5394.JPG

[mikadonovan]

Re: MPC6502 with Finisher SR4100

Take a look at these pics. I'm not sure that this is your problem, but it's something to check. Cheat the finisher door and watch the staple process, it will be quite noticeable if this is happening.

[hanspeter75]

Re: MPC6502 with Finisher SR4100

Be sure the latest FW install for the Finisher......02.340:10
fixes many bugs

[slimslob]

Re: MPC6502 with Finisher SR4100

See the trouble shooting guide for the MP C6502 starting at page 34, 8. Optional Units: 8.1 Finisher (SR4100/SR4110).