Color Calibration on LD525C

[Guest]

I have an ld525c that prints b/w fine. On the color, they are not correctly aligned. By going to the tools/maint/color registration it attempts to run then comes back with a color registration could not be performed message. Is there another way to do this ? I know on the old b/w ones you went to the clear modes with a few other keys that I now can't remember, haven't dealt with one in a few yrs. Any help would be greatly appreciated. Thanks

[Tonerbomb]

Re: Color Calibration on LD525C

perhaps you should introduce your self in the newbie check in forum, then search the forums for the info you request as it has been posted many times before......