METIS: strange printing issue

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Zeldaman
    Senior Tech

    500+ Posts
    • Mar 2011
    • 946

    #1

    METIS: strange printing issue

    Attached Files
  • Mark Bbb
    Service Manager

    1,000+ Posts
    • Jun 2012
    • 1662

    #2
    Re: METIS: strange printing issue

    There is modification: D0894666, it is a prevention for breaking the whole PTR unit.
    I have already replaced 2 complete PTR units D0874551.
    ...

    Comment

    • Zeldaman
      Senior Tech

      500+ Posts
      • Mar 2011
      • 946

      #3
      Re: METIS: strange printing issue

      Hi there!
      METIS = 2011/2003/2503..... The modfication you mentioned is for the older models.
      Greetings...

      Comment

      • Mark Bbb
        Service Manager

        1,000+ Posts
        • Jun 2012
        • 1662

        #4
        Re: METIS: strange printing issue

        Wright, but it could be a same issue?

        Comment

        • Zeldaman
          Senior Tech

          500+ Posts
          • Mar 2011
          • 946

          #5
          Re: METIS: strange printing issue

          Hi there!
          Normaly a sc & paperjam.
          Greetings...

          Comment

          • Mark Bbb
            Service Manager

            1,000+ Posts
            • Jun 2012
            • 1662

            #6
            Re: METIS: strange printing issue

            Looking at your photograph, it's a cheap construction, it might break even by looking at it!

            Comment

            • Zaxxon
              Senior Tech

              500+ Posts
              • Jan 2014
              • 608

              #7
              Re: METIS: strange printing issue

              Originally posted by Mark Bbb
              Looking at your photograph, it's a cheap construction, it might break even by looking at it!
              I haven't replaced any of these, even if it looks flimsy.
              Please start you post with brand, model, problem.

              Comment

              Working...