MP 201 S-S reg Duplex

[ABS tect]

Anyone know which adjustment to make to make the second page of a 1 sided to 2 sided duplex copy not get cut off? The second page, or the back of the duplex copy, the left side of it is cut off. I swear i have tried about every s-s adjustment in sp mode to no avail. any help?

This happens on glass and adf FYI
Single page copies are all in line. Thanks

[ruben]

Re: MP 201 S-S reg Duplex

Make sure the Duplex Margin, in User Tools > Copier Features, is set to 0 (default to 5mm / 0.2inch).

You should then do the finer adjustments in SP1 Feed for each tray, and duplex.

See: User Tools Menu

[ABS tect]

Re: MP 201 S-S reg Duplex

Make sure the Duplex Margin, in User Tools > Copier Features, is set to 0 (default to 5mm / 0.2inch).

You should then do the finer adjustments in SP1 Feed for each tray, and duplex.

See: User Tools Menu

Ah! I feel like an idiot, spent all my time in the SP mode and didn't even check that. Thank you so much! That was it!