PRODUCTION PRINTER

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • brotherlarry
    Technician

    50+ Posts
    • Jan 2014
    • 55
    #16
    Re: PRODUCTION PRINTER

    The MGI Meteor

    Sent from my SM-G900V using Tapatalk

      Comment

      • brotherlarry
        Technician

        50+ Posts
        • Jan 2014
        • 55
        #17
        Re: PRODUCTION PRINTER

        The MGI Meteor up to 400gsm

          Comment

          • slimslob
            Retired

            Site Contributor
            25,000+ Posts
            • May 2013
            • 37048
            #18
            Re: PRODUCTION PRINTER

            The new color machines, MP C3004-3504-4504-6004, will support 52-300 gsm.

              Comment

              • Timmytronic
                Trusted Tech

                Site Contributor
                100+ Posts
                • Oct 2010
                • 249
                #19
                Re: PRODUCTION PRINTER

                Hi. I have 3 pro 5100's and 8 8002's running 300gsm all day long, duplexing also if set to thick 3 or 256gsm. Also the 5100's run 400gsm ivory board or 350gsm uncoated from the SRA3 LCT. You have to remove the transfer belt bar tho or else the text is smudged 3/4 way down as the card clips it a little. I know this is pushing boundaries but I have machines over a million and fine still on the original transfer belts and fuser belts.

                Hope that helps.

                  Comment

                  Previous 1 2 template Next
                  Working...