@Remote setup on 3510DN

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Stormhammer
    Trusted Tech

    100+ Posts
    • Mar 2016
    • 150

    #1

    [Misc] @Remote setup on 3510DN

    I have a customer asking if it's possible to set up @remote on their 3510DN. I thought setting up @remote was possible on almost every machine model in Ricoh's fleet, I must be wrong though since I don't see any setting to enable it in either the SP modes or the WIM.
  • PillePalle
    Technician
    • May 2013
    • 42

    #2
    Re: @Remote setup on 3510DN

    Originally posted by Stormhammer
    I have a customer asking if it's possible to set up @remote on their 3510DN. I thought setting up @remote was possible on almost every machine model in Ricoh's fleet, I must be wrong though since I don't see any setting to enable it in either the SP modes or the WIM.
    Hi

    @Remote is no available for this machine. Sorry.

    Comment

    • slimslob
      Retired

      Site Contributor
      25,000+ Posts
      • May 2013
      • 37375

      #3
      Re: @Remote setup on 3510DN

      Originally posted by Stormhammer
      I have a customer asking if it's possible to set up @remote on their 3510DN. I thought setting up @remote was possible on almost every machine model in Ricoh's fleet, I must be wrong though since I don't see any setting to enable it in either the SP modes or the WIM.
      As far as I know, only machines with either the GW or GW+ controller have embedded @remote. One quick check is whether it uses SD card firmware update. Even if it does not support embedded, it might still work with RC Gate Appliance or @Remote Office appliance.

      Comment

      Working...